Results 1 to 7 of 7

Thread: Theoben Evolution Cocking Shoe?

  1. #1
    Join Date
    Jan 2008
    Location
    St.Albans
    Posts
    2,088

    Theoben Evolution Cocking Shoe?

    Could anyone who has replaced one of these shoes/buttons let me know the procedure,please.It appears the original is integral to the cocking link and must be drilled out?

  2. #2
    Join Date
    May 2008
    Location
    chesterfield
    Posts
    373

    shoe

    hi, ive done two years ago. but cannot remember exactly ? did I drill it a little then pressed it out or it just pressed out ?? sorry. all I remember it wasn't a major just a vice and two sockets needed. I seem to remember I peened the new one a little after pressing it in , so maybe I drilled the old one a bit before pressing out .. good luck gc..

  3. #3
    Join Date
    Dec 2007
    Location
    Runcorn right by the bridge
    Posts
    6,503
    Who cocked it out of the stock
    Its riveted into the bar I drilled it to relieve the pressure before pressing it out remember to fit the new one with the flat at the front

  4. #4
    Join Date
    Oct 2012
    Location
    Bath
    Posts
    2,174
    Quote Originally Posted by mrto View Post
    Could anyone who has replaced one of these shoes/buttons let me know the procedure,please.It appears the original is integral to the cocking link and must be drilled out?
    It's just press fitted mild steel which you can drift out with the correct pin punch.... its a simple top hat with a small shoulder that stops it dissapearing into the cocking arm. if there's enough of it left then just measure it & get one turned up., Pop it in the hole, and squash a ball bearing into the back to deform it slightly to get it to stay put
    "its hard being a modest genius. "
    Theoben Evo .22 (at the moment) - Meopta Artemis 2000 6x42 4b, DS huntsman classic .177 - Vortex Viper 4-12x40pa BDC, BSA R10 mk2 .22 - Meopta Artemis 2000 4x32 4A.

  5. #5
    Join Date
    Jan 2008
    Location
    St.Albans
    Posts
    2,088
    Thanks for the info guys, I see Knibbs's has them,but at their usual extortionate prices!

  6. #6
    Join Date
    Oct 2009
    Location
    inverurie
    Posts
    11,318
    Try impact airguns or tawnado .

  7. #7
    Join Date
    Oct 2012
    Location
    Bath
    Posts
    2,174
    Quote Originally Posted by mrto View Post
    Thanks for the info guys, I see Knibbs's has them,but at their usual extortionate prices!
    Yeah but 14 + p&p ain't that bad.. in principle it's alot but actually it's only an expensive tin of pellets..
    "its hard being a modest genius. "
    Theoben Evo .22 (at the moment) - Meopta Artemis 2000 6x42 4b, DS huntsman classic .177 - Vortex Viper 4-12x40pa BDC, BSA R10 mk2 .22 - Meopta Artemis 2000 4x32 4A.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •