Results 1 to 4 of 4

Thread: Anschutz 335 Refurb

  1. #1
    Join Date
    Feb 2015
    Location
    Norfolk
    Posts
    985

    Anschutz 335 Refurb

    I've been given an Anschutz 335 to repair, I've got the stock to do but when I removed it from the action I found the bracket on the cylinder had snapped on one side. Quite clearly this is a weakness as weld was evident on the other side where it had been repaired.

    To repair the bracket which is the best welding method to reattach it?

    Thanks

    BM

  2. #2
    Join Date
    Nov 2001
    Location
    Blackburn, Lancs. (under a bridge)
    Posts
    22,944
    The welding is the weak spot ( get it) on the 335 and Ive seen a few with this problem. Im sure someone with welding experience will be on here soon to answer your query with good advice.

    They are a great rifle and well under stated.

    ATB
    Ian
    Founder & ex secretary of Rivington Riflemen.
    www.rivington-riflemen.uk

  3. #3
    Join Date
    Jun 2013
    Location
    Sheffield
    Posts
    1,960
    No expert but Tig would be best or a well set up mig.

  4. #4
    Join Date
    Feb 2015
    Location
    Norfolk
    Posts
    985
    Thanks Mick, my mate who does a bit of gunsmithing has an ARC and MIG welder so I'm hoping one of them will be sufficient.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •