Another Rapid thread.

[AC all day]

Well some saw i bought a sorry Rapid 7 a while back....well i sorted out the bottle issue and its still got no mag....but i have had my first session with it.....what a session!!
I didn't think i was going to like it 'that' much but after watching 8 of my first 10 go through the same hole at 30 yrds i think its a cracker...bit fiddly to load without a mag, but it dosen't take long to find a knack.....

[angrybear]

They do sneak up on you like that

[rgc_swanseaARC]

What cal is it and what model?

Regards,
Rhys

[AC all day]

What cal is it and what model?

Regards,
Rhys

I think its a mk1 and in .22 also must be reg'd its so close shot to shot over the crono (Skan mk5)....

[flyfisher]

bring it round to mine I will tell you if it is regged, also got a spare mag.

[secretagentmole]

Dr Bob did start making them, Michael Tawn imports them from America.

[12/200]

Dr Bob did start making them, Michael Tawn imports them from America.

Dr Bob is the way to go.
I had 2 Theoben originals that were .5mm different thickness & the thicker was not interchangeable between 2 rifles
i do use the Crosman Maurder Mags (177 & 22) as well from usa, these work perfectly well & cost about £13 delivered via ( if you can find them ) I note Ramsbottoms are selling same ones for £25.99

[AC all day]

Dr Bob is the way to go.
I had 2 Theoben originals that were .05mm different thickness
i do use the Crosman Maurder Mags (177 & 22) as well from usa, these work perfectly well & cost about £13 delivered via ( if you can find them ) I note Ramsbottoms are selling same ones for £25.99

Many thanks for that....never thought of that...two ordered!!

[westbrom1]

those crossman mags are not a direct fit, you have to pad the bottom of the mag a couple of mil by gluing some plastic on the bottom

or padding your slot out....sounds painful..lol

[12/200]

those crossman mags are not a direct fit, you have to pad the bottom of the mag a couple of mil by gluing some plastic on the bottom

or padding your slot out....sounds painful..lol

Insert from the r/h side but the will be sort of upside down, no packing req
if ordering from usa or non EU, make sure the package is marked under £15 value or the PO & HMRC will have a large waddage of beer tokens from you

[flyfisher]

thats what I use, got one here if the op wants to try it.