Results 1 to 7 of 7

Thread: Can You ?

  1. #1
    Join Date
    Oct 2009
    Location
    SHANKLIN
    Posts
    1,394

    Can You ?

    Can you swop barrels on a S400 ??? HOLLY
    " BE YOURSELF , EVERYBODY ELSE IS TAKEN "

  2. #2
    Join Date
    Jul 2003
    Location
    peterboring
    Posts
    18,893
    yup. the best swap is for a 200. otherwise it's emery cloth and polish.
    the only thing i can find wrong is the nut on the steering wheel.

  3. #3
    Join Date
    Oct 2009
    Location
    SHANKLIN
    Posts
    1,394

    How

    How do you separate the barrel from the breech ??? HOLLY
    " BE YOURSELF , EVERYBODY ELSE IS TAKEN "

  4. #4
    Join Date
    Jul 2003
    Location
    peterboring
    Posts
    18,893
    there should be a grub screw in the trigger guard. its very small. cant remember if its 2 or 4 mill. hex you need ,the nice thing is AA put a slot in the trigger guard for access.
    only did this twice and its a pain. i swapped the barrel for a BSA superstar barrel.
    the only thing i can find wrong is the nut on the steering wheel.

  5. #5
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    http://www.airgunbbs.com/showthread....-a-s400-barrel

    from some one that knows what they are doing


    Undo barrel band

    Loosen the grub screws on the front ( TOP ) of the breech and hey presto its done !

    Some are glued in place so you may have to use a bit of force but not too much .

  6. #6
    Join Date
    Oct 2009
    Location
    SHANKLIN
    Posts
    1,394

    Cheers

    Many thanks for that ??? HOLLY
    " BE YOURSELF , EVERYBODY ELSE IS TAKEN "

  7. #7
    Join Date
    Nov 2000
    Location
    worcester
    Posts
    604
    Don't forget the 3mm grub screw under the breach on the later models.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •