Gas Ram Conversion Help

[Demolad]

which way round does the ram go in on a hatsan 1000s video shows fat end into the piston (pellet end) Hatsan picture shows the fat end to the trigger end

Picture https://1drv.ms/a/s!AqB12ADTEcm9_EbEFZeYPSRxL2uW

[bighit]

mine was an AWT ram in an air arms Hi-power. fat end in the piston end.

look here also https://www.customairseals.com/produ...triot-walther/

https://www.customairseals.com/wp-co...Assembly-2.jpg

[Demolad]

that what was confusing me same picture you got does it mater what way round it goes ????

[bighit]

since photobucket started charging to hyperlink its made it difficult to see on other forums how people did it . the pictures dont show up.

the AWT ones definitely went in with the fat end in the piston.

try contacting edgar brothers who import the hatsan rifles and ask if they can tell you how it goes in .

[Demolad]

since photobucket started charging to hyperlink its made it difficult to see on other forums how people did it . the pictures dont show up.

the AWT ones definitely went in with the fat end in the piston.

try contacting edgar brothers who import the hatsan rifles and ask if they can tell you how it goes in .

I rang Edgar Brothers today and confirmed fat end trigger end

Thanks for your Help

[bighit]

I rang Edgar Brothers today and confirmed fat end trigger end

Thanks for your Help

Your welcome. Each maker has their own way of doing it.

Hope it works out OK.