hw77 back block wanted

[splosh!]

if any of you gent have a breaker I'm after the above please

[fozzy45]

Bear in mind that blocks are made with their cylinder, so if it's a block you need to put onto another cylinder, it may not fit. Although it's possible to turn it down to fit.
Fozzy

[T 20]

The back blocks off a 35, 80 or 97 will also fit a 77.


All the best Mick

[Phil Russell]

Bear in mind that blocks are made with their cylinder, so if it's a block you need to put onto another cylinder, it may not fit. Although it's possible to turn it down to fit.
Fozzy

My daughter found this out the hard way ... well not really hard. An auction buy rifle with .22 marking but a .177 barrel had great difficulty with scope mounts as scope would not zero no matter what. Then we put mounts all on the cylinder; ignored the back block. Problem solved.
Cheers, Phil

[splosh!]

The back blocks off a 35, 80 or 97 will also fit a 77.


All the best Mick

the 77 in question has the hw 35 block on it but looks odd with the serial number on it .may be I should leave as found don't want to mess about tying to get a 77 to fit if it hassle

[splosh!]

My daughter found this out the hard way ... well not really hard. An auction buy rifle with .22 marking but a .177 barrel had great difficulty with scope mounts as scope would not zero no matter what. Then we put mounts all on the cylinder; ignored the back block. Problem solved.
Cheers, Phil

thank you Phil, I think I should may be leave as found then.

[mrgeoff]

Was going to offer a 35 back block, would need a total re blue, so maybe not what your after.