Quote Originally Posted by thisisdonald View Post
I built a bench rest for sighting in when I still had my fwb100.
https://goo.gl/photos/w6LetmycHe1kLN6E7
I put a beanbag under the grip when sighting in.. obviously as I had to remove the pistol to cock it, it wasn't perfect, still, using it, I could dial right in on the 10 and the pistol proved it could do one hole groups if I could (which I couldn't 😂! )

I made it from a board of ash and only took about an hour or so to make. The leather was from an old jacket.

You could make something like this to see which pellets are most accurate.

I used r10 and meisterkugeln but preffered the r10. Like Phatman pointed out - it's not a huge difference in cost per session and I just felt that I shot better with r10. Whether that was scientific or all in my head, nobody will know.

I would buy a few kinds and shoot shoot shoot... it will quickly become apparent what suits.
Hi Donld.
Thanks for your post and photos that's a handsome pistol clamp I bet it works a dream I'm getting my carpenter friend to make me one he doesn't know it yet but it would benifit both of us .
He pop over last night with is chronograph my tau7
Over a shot string of 10 using R10 pellets was between 473 and 483 5 of the shots were 475 he said he thought that was pritty good for a c02 would you say it was or do I need to adjust her up or down??

Taken on board pellet information I do have some R10 left about half tin so I've sent away for JSB green
Tin I also have a few jsb express but they are round heads so lots to do over the week end
Thanks for posting
From frank