Sheesh.....It's never simple is it
I Guess by sticking to well known makes I'll be OK? i.e. Hull, gamebore, lyalvale etc
Sheesh.....It's never simple is it
I Guess by sticking to well known makes I'll be OK? i.e. Hull, gamebore, lyalvale etc
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....
If you don't mind paper cases Kranks do them by the 100 ready primed.
They can be reloaded a few times until the crimp mouth goes soft. The thing to watch for with paper cases
is small black burn marks like pinholes where the case meets the head.
If you see them scrap the case as it is on the verge of separating.
You could try clay shoots to find suitable cases,they usually have a problem disposing of them.
I know one shoot that has two jumbo bags spilling over with fired cases.
The easy option is to trim the star crimp off them and use a card and rolled turnover crimp. I load all my bp cartridges that way. The turnover tool fits in my pillar drill.
[I]DesG
Domani e troppo tardi
My intention was to buy new primed cases then re-use them. The guy at FES who I intend to get the kit from said the Lee Load-All II is not very good when it comes to crimping new cases and I was better off with used cases.
Daystate Air Ranger FAC - Kral Bullpup & NP03 - CZ 452 .22lr - Lithgow 17hmr - Remington 783 .223 - Franchi 612vs 12G - Renato Gamba 12G O/U - Hatsan Escort 12G
Nostalgia isn't what it used to be.....
Go to a clay shooting ground and collect as many as you can carry for free.