Cp2

[Midasi1]

My solution to sorting the pellet skirt size problem on my CP2 was first forget the magazine (terrible thing) then put a selection of pellets through a sizer - 5.51 - all then fitted snugly with a slight click as the probe was pushed home.

If I had known about the useless mag I would have bought the single shot as that is what I have now!

All fired no problem.

Settled on Crosman Ultra Magnums.

Boring job but I did mine in batches after washing and lube them.

Hope this helps.

[PaulR]

Problem solved.

I tried the "oversized" pellets I have in the smaller barrel - no problem they slide in firmly but easily.

I removed the rifle barrel - pellets would not fit by hand pressure.

Solution one HSS drill marginally bigger than .22 - (7/32") - a vice and a very slow speed twist just at the entrance and a couple of mm deep a quick clean up of swarf (dust really) and - Bingo - the pellets now press in firmly just like the smaller barrel.

[Gareth W-B]

.
Nice one. Job done.