Results 1 to 10 of 10

Thread: Hw90 barrel

  1. #1
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,573

    Hw90 barrel

    Hi just to ask if the hw90 barrel will fit on a hw80 action, Thanks

  2. #2
    Join Date
    Aug 2013
    Location
    worthing
    Posts
    3,333
    I believe so, but I'm sure someone will be along to confirm or refute...
    Last edited by rabbitwrecker; 21-10-2017 at 07:50 PM.

  3. #3
    Join Date
    May 2016
    Location
    BOLTON
    Posts
    816
    yes it will

  4. #4
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,573
    Quote Originally Posted by DM80 View Post
    yes it will
    Thanks buddy, Sure one of my old 80s had a 90 barrel on it , Thanks

  5. #5
    Hsing-ee's Avatar
    Hsing-ee is offline may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
    Join Date
    Dec 2001
    Location
    Glasgow
    Posts
    18,217
    Usually they stamp the rifle model number on the left hand side of the breech block. It is actually quite annoying as it makes the rifle look mismatched if you do a barrel swap, although the actual component is the same. Weihrauch has its quirks.

  6. #6
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,322
    yeah, 80, 90, 85, 95, 98 all interchange
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  7. #7
    Murphy is offline Cooee! Chase me you naughty boys!
    Join Date
    Aug 2003
    Location
    Wigan
    Posts
    22,357
    Quote Originally Posted by Jon Budd View Post
    yeah, 80, 90, 85, 95, 98 all interchange
    But they look nicer on the 80 and 90.

    The smaller cylinder makes the breech block stick up a little and not flush.
    Master Debater

  8. #8
    Join Date
    Mar 2010
    Location
    mountain ash
    Posts
    8,573
    Thanks lads , it's only going to be for a cal swap and original barrel will be kept,

  9. #9
    Join Date
    Apr 2012
    Location
    Bristol
    Posts
    6,259
    99 doesn't- pivot to link is different length. But that doesn't help your question.

  10. #10
    Join Date
    Mar 2005
    Location
    northwich Cheshire
    Posts
    1,222
    Quote Originally Posted by Murphy View Post
    But they look nicer on the 80 and 90.

    The smaller cylinder makes the breech block stick up a little and not flush.
    can the block be machined to be more inline with the cylinder.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •