What silencer do you use for your .25 sub 12 airguns?
i have just got a .25 ultra, i have a spare hw silencer but don't know if it will clip the end when firing.
so before i try i just wanted to see what the alternatives are?
cheers
Mister Wood to you.
What silencer do you use for your .25 sub 12 airguns?
i have just got a .25 ultra, i have a spare hw silencer but don't know if it will clip the end when firing.
so before i try i just wanted to see what the alternatives are?
cheers
I wanna be the airgunbbs Model
Warning! Flammable
I use an A&M Twink. Measure the exit hole on your mod, you want 8.5mm or greater.
You can spend thousands and still miss a barn door or spend just enough and enjoy yourself. If you haven't got the talent to start with a million pound won't fix it. Whippet, Russell, a few bang sticks and a flat cap.
Registered User
Standard HW silencers are up to .22, they do do a .25 specific silencer.
Failing that huggett, I believe you only need to change the end cap to use these for .25.
Or Daystate FAC Airstream is .25 specific
Daystate Owners Club new site: www.daystateownersclub.com/forum
Registered User
I use HW with standard baffles enlarged to 7.3mm. If you shoot over 30 fpe you should strengthen the internals, those curlers will eventually become accordions.
Viking Mk2 .177/.22 bullpup, BSA Scorpion SE .177, BSA Scorpion .25 100M gun, BSA Scorpion .224 100fpe 100M gun,
Evanix Blizzard .257/.357 200M BR, Evanix Sniper X2 .45 at 270 fpe
Registered ̶D̶i̶a̶n̶a̶ User
A British made BSA VC
Admin Team
Aye, the BSA VC comes with two interchangeable chokes for .177 and .22, fitting no choke is for .25 cal.
Don't know if it's quite as quiet as the HW moddy, but mine was pretty good.
Registered User
I'd also measure the baffle washersOriginally Posted by Rob Edge
I use an A&M Twink. Measure the exit hole on your mod, you want 8.5mm or greater.
Posting Permissions
Reply With Quote