Brocock Contour Super Six Inlet Valve Seal ?

[Vic Thompson]

As above, a friend asked me to look at one with a leaky Inlet Valve. It had Seal on the Valve Stem that looked non original but as I can't find a parts diagram anywhere I don't know what the original part looked like anyway. In the meantime I've fitted two small O Rings onto the Valve Stem which works for the moment but as this is not likely to be a permanent solution my question is : what was fitted as a Seal in the first place ? was it a single O Ring/a single Seal of some other type, or what ?

O Ring Seal Kits are available on E Bay, but all I need is the Inlet Valve Seal/Valve Stem complete, are these available separately and if not, is there a repair method other than the above which would last ?

Thanks in advance for all useful responses,

Vic Thompson.

[Phil Russell]

I guess the days have gone when you could telephone the manufacturer (Daystate?) and ask.
Is there a Brocock owners' forum?
Cheers, Phil

[ZAKDINGEL]

Have you looked here http://www.airgunspares.com/store/ca...4/955/BROCOCK/

[Vic Thompson]

thanks for the replies to date, much appreciated.

Vic Thompson.