Page 1 of 2 12 LastLast
Results 1 to 15 of 16

Thread: Which Chrono for a HW45

  1. #1
    Join Date
    Sep 2017
    Location
    Brighton
    Posts
    45

    Which Chrono for a HW45

    Currently using a combro but seem to get erratic results. Whst do you guys use?
    Now's the time to enjoy oneself

  2. #2
    Join Date
    Jul 2015
    Location
    Barnstaple
    Posts
    182
    The "polish one" chrono-R2, works a treat.

  3. #3
    Join Date
    Dec 2012
    Location
    Bromsgrove
    Posts
    870
    Quote Originally Posted by Airways View Post
    Currently using a combro but seem to get erratic results. Whst do you guys use?
    I suggest its the gun....unless ran completely dry ...and i do mean scrubbed out with degreasant within an inch of its life ....it micro diesels like a bigun...

  4. #4
    Join Date
    Sep 2017
    Location
    Brighton
    Posts
    45

    HW45 32 years old

    tried mine at the club today and it shot really well over 10 metres free hand but did get the odd smoker. gonna strip, clean and polish tomorrow. just find it a little hard with the recoil and the conbro
    Now's the time to enjoy oneself

  5. #5
    Join Date
    Sep 2017
    Location
    Brighton
    Posts
    45
    New breech seal git me to 4.9 ftlbs.
    Finally stripped it.
    Got a feeling someone’s been there before as the two 5p coins gave it away as power washers and tonnes of lube. Polished piston with lightning holes in it. Will add photos
    Now's the time to enjoy oneself

  6. #6
    tinbum's Avatar
    tinbum is offline Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,386
    Quote Originally Posted by Airways View Post
    New breech seal git me to 4.9 ftlbs.
    Finally stripped it.
    Got a feeling someone’s been there before as the two 5p coins gave it away as power washers and tonnes of lube. Polished piston with lightning holes in it. Will add photos
    5p's? Yep, that's an aftermarket option. They were fitted with 10c coins from the factory.
    God rest ye jelly mental men

  7. #7
    Join Date
    Dec 2012
    Location
    Bromsgrove
    Posts
    870
    Quote Originally Posted by tinbum View Post
    5p's? Yep, that's an aftermarket option. They were fitted with 10c coins from the factory.
    the 5 ps a collection of loose change which would actually add to the already erratic beast.

  8. #8
    Join Date
    Feb 2006
    Location
    Farnborough
    Posts
    4,394
    Quote Originally Posted by Airways View Post
    Currently using a combro but seem to get erratic results. Whst do you guys use?
    How do you attach a combro to an HW45?
    Rich
    WANTED: Next weeks winning lottery numbers :-)

  9. #9
    Join Date
    Nov 2009
    Location
    Monmouth, Land of Wales.
    Posts
    14,441
    Quote Originally Posted by averageplinker View Post
    How do you attach a combro to an HW45?
    Rich
    With equal quantities of care and luck, I reckon.

  10. #10
    Join Date
    Feb 2006
    Location
    Farnborough
    Posts
    4,394
    Quote Originally Posted by Rickenbacker View Post
    With equal quantities of care and luck, I reckon.
    WANTED: Next weeks winning lottery numbers :-)

  11. #11
    Join Date
    Sep 2017
    Location
    Brighton
    Posts
    45
    Quote Originally Posted by averageplinker View Post
    How do you attach a combro to an HW45?
    Rich
    I have been holding mind with my hand round the muzzle. Seems to work fine now
    Now's the time to enjoy oneself

  12. #12
    tinbum's Avatar
    tinbum is offline Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,386
    Quote Originally Posted by Airways View Post
    I have been holding mind with my hand round the muzzle. Seems to work fine now
    That should be ok, it was when I was testing power at 10m that I tended to clip the edge occasionally.
    God rest ye jelly mental men

  13. #13
    Join Date
    Sep 2017
    Location
    Brighton
    Posts
    45

    Red face

    Quote Originally Posted by tinbum View Post
    That should be ok, it was when I was testing power at 10m that I tended to clip the edge occasionally.
    I tried that and never clipped it once. Then again never got a reading
    Now's the time to enjoy oneself

  14. #14
    Join Date
    Sep 2017
    Location
    Brighton
    Posts
    45
    Quote Originally Posted by Airways View Post
    I tried that and never clipped it once. Then again never got a reading
    Well I’ve stripped and polished the internals. Got some Delrin coming as want to play around with guides and top hats.
    Question for the experts out there the piston seal was a very tight fit and took a lot of effort to move the piston in the compression chamber. How much restistance should I be looking to move the piston in the working area?
    Last edited by Airways; 02-12-2017 at 08:10 AM.
    Now's the time to enjoy oneself

  15. #15
    Join Date
    Dec 2012
    Location
    Bromsgrove
    Posts
    870

    Piston seal

    Back it off....machine a 7 degree angle on the compound slide from the front face to the piston interface.
    leaving a fine edge which seals...go sliding fit....it will soon seal up as the angle will bed in and self adjust for wear ...upto a point.
    Just dont expect too much from the top heavy bugger....it is what it is...
    5 ftlbs fairly accurate with no piston weight....
    Any top hat weighting will add power ...gram per gram....but jump will be added gram by gram too.
    Dont introduce lube ....run it dry until it wears out....it diesels on anything more than pure air....and im talking not the air in London....

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •