Advice on Park RH93

[Sundance]

Any thoughts on getting the power up gents? Just preload the springs with washers ?

[tinbum]

Any thoughts on getting the power up gents? Just preload the springs with washers ?

If the seals are in good order then it may work. Alternatively replace them with something a little "springier"! What's the specs?

[Sundance]

If the seals are in good order then it may work. Alternatively replace them with something a little "springier"! What's the specs?

Not opened it up yet Nick...only had it yesterday. Shoot lovely at 10 ft lb though but want a bit more..

[Sundance]

Also I'm unsure as to whether I need to balance the two springs together? Not really sure how it all works as yet...

And no idea re spares and parts...

[Shed tuner]

Also I'm unsure as to whether I need to balance the two springs together? Not really sure how it all works as yet...

And no idea re spares and parts...

Specs are weird. Balance not needed as the chain does that, so long as the weaker does not overtake the stronger.

[Sundance]

That's good to know John, thanks for that.

Still not had time and space due to work to open it all up.

I notice lots of fiddly c clips on the pins, the type that go ping... I was going to make a sort of wooden pen with a grove in the tip for easing them out but open to suggestions...

[Shed tuner]

I notice lots of fiddly c clips on the pins, the type that go ping... I was going to make a sort of wooden pen with a grove in the tip for easing them out but open to suggestions...

Matchsticks are perfect for pushing off c-clips without damaging bluing