FWB 124 barrel shim.

[I. J.]

This may help.

http://smg.photobucket.com/user/Airs...?sort=6&page=1

[gtfreight]

Thanks Ian. I'll leave it in then.

[I. J.]

Have you tried adjusting the pivot bolt?

I set my break barrels without the spring as so the barrel falls under its own weight.

[Shed tuner]

Have you tried adjusting the pivot bolt?

I set my break barrels without the spring as so the barrel falls under its own weight.

I set mine so they just about don't But not very different in practice...

[gtfreight]

It falls with the lightest of touches so all is well. It's just that it's such a tight squeeze when fitting. I don't remember it being so tight on my last one (but that was 27 years ago so my memory may be playing tricks).
Thanks for your help fellas.

[Rickenbacker]

So just to be clear - FWB Sports have a pair of shim washers on each side? A dished one and a flat one?

The only Sport I ever had, had the breech shims missing altogether, unfortunately.

That was a pretty sloppy fit, I can tell you.

[gtfreight]

Thanks Phil.

[isobar]

So just to be clear - FWB Sports have a pair of shim washers on each side? A dished one and a flat one?

The only Sport I ever had, had the breech shims missing altogether, unfortunately.

That was a pretty sloppy fit, I can tell you.

yes one flat one dished,been a while since i stripped mine so i can't remember which way round. atb