FWB 124 barrel shim.

[gtfreight]

When I bought my Sport I noticed on some diagrams, where the pivot bolt goes through the barrel there is a second washer on the opposite side to the dished washer yet on others it isn't shown. I decided to source one as mine didn't have one fitted. After fitting it I'm not sure whether it should be there as it is a tight fit. Can anyone confirm if this shim should be in place or not please?
Many thanks,
Gary.

[I. J.]

This may help.

http://smg.photobucket.com/user/Airs...?sort=6&page=1

[gtfreight]

Thanks Ian. I'll leave it in then.

[I. J.]

Have you tried adjusting the pivot bolt?

I set my break barrels without the spring as so the barrel falls under its own weight.

[Shed tuner]

Have you tried adjusting the pivot bolt?

I set my break barrels without the spring as so the barrel falls under its own weight.

I set mine so they just about don't But not very different in practice...

[gtfreight]

It falls with the lightest of touches so all is well. It's just that it's such a tight squeeze when fitting. I don't remember it being so tight on my last one (but that was 27 years ago so my memory may be playing tricks).
Thanks for your help fellas.