FX T12 Mag, will it fit ?

[Trumpetier]

Will this fit into my single shot Typhoon ? Looking at some utube clips it looks like it could possibly slip straight in.

[tinbum]

No. Or at least if it does it won't work.

[Trumpetier]

No. Or at least if it does it won't work.

Damn n blast it

[SuffolkRifle]

I've seen (somewhere) where somebody has done the conversion to fit one, using a piece of aluminium angle, washer & basic tools, thought it was on the FX Owners forum, but can't find it on there now (at least, after a quick look) the guide gave all measurements etc.

[SuffolkRifle]

Found it!
http://www.fxoc.info/viewtopic.php?f=12&t=3826

[tinbum]

Found it!
http://www.fxoc.info/viewtopic.php?f=12&t=3826

Now that's good! I'd thought the mag would be like my FX Cyclone/Scimitar/Verminators where it requires a pawl to rotate the mag. Does the spring loaded mag self actuate with the bolt?

[Trumpetier]

Found it!
http://www.fxoc.info/viewtopic.php?f=12&t=3826

Interesting, thanks

[Rob-Ontarget]

You can get a mag for .22 typhoons.. Ten shot but the downside is you have to move it manually...

http://armasayala.com/gb/weapons-acc...cal-55-mm.html

[Shed tuner]

Now that's good! I'd thought the mag would be like my FX Cyclone/Scimitar/Verminators where it requires a pawl to rotate the mag. Does the spring loaded mag self actuate with the bolt?

No, you can't make a conversion kit from delrin

[Trumpetier]

You can get a mag for .22 typhoons.. Ten shot but the downside is you have to move it manually...

http://armasayala.com/gb/weapons-acc...cal-55-mm.html

Already got that mate, cheers

[SuffolkRifle]

Now that's good! I'd thought the mag would be like my FX Cyclone/Scimitar/Verminators where it requires a pawl to rotate the mag. Does the spring loaded mag self actuate with the bolt?

Basically, wind it up when loading, then it just 'advances' when you withdraw the bolt to the next pellet, rather than the Cyclone style where it's supposed to be pushed round by a pawl (have had my Cyclone decide that it wouldn't advance a couple of times in the past)