HW80 Needs Tuning

[Paulmoto]

Hi Chaps
I have a HW80 lovely gun but just Chrono at 9.5flb, so I would like to Tune her up to 11.5ish happy to do what ever is required but not sure of the best components spring seals etc any suggestions please.
Many Thanks

[tinbum]

Take it apart and check the spring and seals, clean off the grease and relube sparingly. Rebuild and check power again.

[CapitalBee]

Personally, I'd replace the breech seal and re chrono' it before she comes apart. If it's still low then maybe a full piston seal and guide tune up. You could even consider short stroking it. But you might just find the five quid seal fixes it.

[Paulmoto]

many thanks for your advice ive just been searching on line and found this kit http://www..com/products/

do you think its any good ?

ps ill try the breach seal 1st.

[robs5230]

My money would go on the maxi kit from here. Best £43 you'll ever spend on a springer
http://www..com/products/

If the breech seal looks flat, replace it.
If when stripped the piston seal looks brown and feels brittle in any way replace that too.

[bighit]

many thanks for your advice ive just been searching on line and found this kit http://www..com/products/

do you think its any good ?

ps ill try the breach seal 1st.

If its a TbT kit then yes . there is other tuning companies out there ..seems you cant use the TbT web address same as you cant use eblag

[Paulmoto]

yes its the TbT kit although I cant work out how to purchase from there website !! its seems theres no buy button.