Page 2 of 2 FirstFirst 12
Results 16 to 17 of 17

Thread: Zbroia Hortista!

  1. #16
    Join Date
    Oct 2017
    Location
    Briston
    Posts
    66
    Hiya,
    if you back off the screw that holds the safety in by a quarter turn that may give you the desired level friction, likely just a fraction too tight.
    Older generation mags did have a little white dot for reference but when the mags were re-designed this went, i'm sure a touch of tipex strategically placed would do the same job tho

  2. #17
    Join Date
    Sep 2011
    Location
    Horsham West Sussex
    Posts
    311
    Quote Originally Posted by Mekon88 View Post
    Hiya,
    if you back off the screw that holds the safety in by a quarter turn that may give you the desired level friction, likely just a fraction too tight.
    Older generation mags did have a little white dot for reference but when the mags were re-designed this went, i'm sure a touch of tipex strategically placed would do the same job tho
    On the Kozak slackening the safety screw wont help (I tried this first to no avail, you’d need to see it for all to be clear). The safety simply slides a block under the back of the trigger to stop its movement. In my case there was insufficient clearance but increasing the first stage travel gave a bit of extra gap to make operation easy.

    Re mags, good to know, thanks.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •