Park RH93 Strip down with pics

[RichardH]

Putin is in da house

What does the panel think

No one else see the similarities?

[Shed tuner]

He's richer than me

[Muskett]

Really enjoyed the educational video.
My Park .177 is working flawlessly, so not touching it. ONe day it may need to be,

I really would be interested in what spring replacements are required. I would even buy if some needed to be made up a set for the spares future box. Annoyingly someone did give me a lead to where some might be found, but I lost it. No funds at the time too. Anyhow, I really like my Park so want to keep and shoot for as long as I can.

I'll be following the progress closely.
Many thanks for the strip... the rifle...

[gc93]

hi , if there was a little interest I possibly could get some made up, either a pair to copy or measurements . does anyone know if they are wound opposite to each other or both wound in the same direction ? thanks gc93.

[Shed tuner]

hi , if there was a little interest I possibly could get some made up, either a pair to copy or measurements . does anyone know if they are wound opposite to each other or both wound in the same direction ? thanks gc93.

standard wind. Neither piston can rotate, so I guess it doesn't really matter. I'm measure up when I get some time

[gc93]

standard wind. Neither piston can rotate, so I guess it doesn't really matter. I'm measure up when I get some time

hi there, yes have a measure when time the more the better and find a happy medium. im totally guessing but the 177 and 22 springs should be the same so cal and measurements needed

[dvd]

hi , if there was a little interest I possibly could get some made up, either a pair to copy or measurements . does anyone know if they are wound opposite to each other or both wound in the same direction ? thanks gc93.

Hi,
I had a pair of spare springs a few years ago made by a chap who used to be on here, I do not recall his full name but I think it was Phil.
These are the measurements of a standard pair as found on my Park RH93 Cal 0.22.

Dimensions and weight of the standard springs:

Short Spring, (pushing front piston rearwards).
3.9mm wire x 19 coils Weight: 108 grammes.
Length: 14.8cm Outside Dia:23.3mm. Internal Dia.:15.5mm.

Long Spring,
3.3mm wire x 29 coils. Weight:94 grammes.
Length: 16.3cm Outside Dia.:18.3mm. Internal Dia.:11.6mm.

[gc93]

Hi,
I had a pair of spare springs a few years ago made by a chap who used to be on here, I do not recall his full name but I think it was Phil.
These are the measurements of a standard pair as found on my Park RH93 Cal 0.22.

Dimensions and weight of the standard springs:

Short Spring, (pushing front piston rearwards).
3.9mm wire x 19 coils Weight: 108 grammes.
Length: 14.8cm Outside Dia:23.3mm. Internal Dia.:15.5mm.

Long Spring,
3.3mm wire x 29 coils. Weight:94 grammes.
Length: 16.3cm Outside Dia.:18.3mm. Internal Dia.:11.6mm.

hi, thanks for going to the trouble , wonder if different in 177 cal ?

[Shed tuner]

hi, thanks for going to the trouble , wonder if different in 177 cal ?

I think they are the same between cals... the .177 was generally about 10.5 fp