Easy answer; drill/ream out the stock cup until you can fit a thin wall socket down it, you can also turn/file/grind a socket down ultra thin as a specialist tool or try a nut driver as they're usually much thinner walled than a conventional socket.Originally Posted by Rickenbacker
Cheers Tom, but 60mm won't do.
Material doesn't really matter too much, though stainless would be nice.
It's a long stock bolt for a FT stock.
I can get M7x70mm in a hex bolt, but I'd have to try to put a screwdriver slot in it, which ain't going to end up looking very pretty.
That's because I couldn't get a slim 11mm socket in the recessed stock bolt cup, to do up the hex.
Reply With Quote