I use Morrells, semi gloss finish, in a rattle can. Its a quick drying cellulose lacquer.http://www.morrells.co.uk/
What is used on them? Such as the ones on daystate models? Is it just linseed oil?
I use Morrells, semi gloss finish, in a rattle can. Its a quick drying cellulose lacquer.http://www.morrells.co.uk/
You want it fixed when??!
I use Danish oil, you can just use a couple of coats to get a semi satin finish or build up more to achieve more gloss.
I’ve used Morrells as well and it’s pretty good but you need a fair few coats as it goes on thin. I now use 2K automotive clear coat which I think is better in my opinion as it goes on thicker and is a tougher finish but you need a compressor and spray gun
Tip! don’t do it in cold weather , you get condensation in the paint/varnish layers and it makes the finish milky. If you in the garage warm it up a bit before you start.
All the best
Shaun
You can use 2k spray from a can ....more like the original finish 😉👍
them there springer's are soooooo addictive