Shortening an underlever

[tinbum]

I want to shorten the underlever on an HW97 but can't figure out how to remove the tube from the hinge.

Anyone done it?

[T 20]

I want to shorten the underlever on an HW97 but can't figure out how to remove the tube from the hinge.

Anyone done it?

I've removed the one on a 77 Nick.

The 14mm pipe is pressed and loctited onto a fairly short stub at the hinge end.

Easiest way for you would be to lathe the tube down round the stub then heat it to release the Loctite, or just machine the tube off --- it's 14mm OD X 10mm ID.

[Mole trapper]

Is it just me or is this Mick bloke a walking encyclopedia

[NewPaul]

Is it just me or is this Mick bloke a walking encyclopedia

A what ?... ahh, just read it again, "walking".. phew

[tinbum]

I've removed the one on a 77 Nick.

The 14mm pipe is pressed and loctited onto a fairly short stub at the hinge end.

Easiest way for you would be to lathe the tube down round the stub then heat it to release the Loctite, or just machine the tube off --- it's 14mm OD X 10mm ID.

Removed, shortened, reattatched and refitted. Pics of my new look 97 on faceache soon.

[hotversion]

I did a TXHC so t ended up. txuhcLooked cool.

[robs5230]

Removed, shortened, reattatched and refitted. Pics of my new look 97 on faceache soon.

I'd like to see that Nick

[tinbum]

I'd like to see that Nick

Which groups are you on? I've spammed it over many!

I've sent some pics via messenger

[hmangphilly]

I did a TXHC so t ended up. txuhcLooked cool.

Now you've got arms like Popeye

[WILBA]

I did a TXHC so t ended up. txuhcLooked cool.

Would not like to do that to my b&m bullpup tx200sr. Its a bugger to cock now without a shorter underlever/barrel

[Rickenbacker]

Now you've got arms like Popeye

With a decent repeatable shooting technique - That'll be just the one arm

[Rickenbacker]

Would not like to do that to my b&m bullpup tx200sr. Its a bugger to cock now without a shorter underlever/barrel

Fancy selling me a bullpup springer, Chris?

[Two200's]

I did a TXHC so t ended up. txuhcLooked cool.

If you did that quite a while ago and you used to take it to Redfearns, I can actually remember that gun.

You are right, It did look cool and I thought you had done a super job of the conversion too.

However, I tried to cock it and I nearly pooed a kitten. I'm no lightweight either, but sodding hell, that wasn't easy.

[TonyL]

Is it just me or is this Mick bloke a walking encyclopedia

"Legend" is the phrase you're after, Jamie.

[hotversion]

If you did that quite a while ago and you used to take it to Redfearns, I can actually remember that gun.

You are right, It did look cool and I thought you had done a super job of the conversion too.

However, I tried to cock it and I nearly pooed a kitten. I'm no lightweight either, but sodding hell, that wasn't easy.

that's the one,I never thought it was much harder to cock than the std one,I'm supprized at you been a Yorkshire man my 6 year old daughter could cock it with one arm it ended up going up north,the tx not the daughter.