Hw100 trigger adjust

[chrisisthe1@lycos.co.uk]

Hey there, so my hw100 has no first stage! Upon closer inspection the grub screw has fallen out of where it screws to. It's one of the tiny ones but doesn't appear to be listed on any diagrams. Any ideas where to get one or what size they are. Makes standing shots unpredictable

Thanks

[hotversion]

Look on chambers website,they must do one,if your finding it impossible after a few week pm me and al get you one from an enineering supply's

[chrisisthe1@lycos.co.uk]

Thanks I've looked on their site but it doesn't show this individual screw
I'll email them in the morning and see if they do one

[rancidtom]

The second stage adjustment screw is M3x0.5 and 6mm long.

[nuggs]

The second stage adjustment screw is M3x0.5 and 6mm long.

Rancidtom ,Mines missing too ! If that’s the one that is hidden partially depending on where you have the reach of your trigger blade set to ! If so thanks I will look up where to get that size grub screw .

[nuggs]

Rancidtom ,Mines missing too ! If that’s the one that is hidden partially depending on where you have the reach of your trigger blade set to ! If so thanks I will look up where to get that size grub screw .

Have ordered a couple with tapered end and a couple flat end ! Can you say which one will be needed ? Thanks Mike.