Hw100 trigger adjust

[chrisisthe1@lycos.co.uk]

Hey there, so my hw100 has no first stage! Upon closer inspection the grub screw has fallen out of where it screws to. It's one of the tiny ones but doesn't appear to be listed on any diagrams. Any ideas where to get one or what size they are. Makes standing shots unpredictable

Thanks

[hotversion]

Look on chambers website,they must do one,if your finding it impossible after a few week pm me and al get you one from an enineering supply's

[chrisisthe1@lycos.co.uk]

Thanks I've looked on their site but it doesn't show this individual screw
I'll email them in the morning and see if they do one

[rancidtom]

The second stage adjustment screw is M3x0.5 and 6mm long.

[nuggs]

The second stage adjustment screw is M3x0.5 and 6mm long.

Rancidtom ,Mines missing too ! If that’s the one that is hidden partially depending on where you have the reach of your trigger blade set to ! If so thanks I will look up where to get that size grub screw .

[nuggs]

Rancidtom ,Mines missing too ! If that’s the one that is hidden partially depending on where you have the reach of your trigger blade set to ! If so thanks I will look up where to get that size grub screw .

Have ordered a couple with tapered end and a couple flat end ! Can you say which one will be needed ? Thanks Mike.

[chrisisthe1@lycos.co.uk]

It's the 1 that's covered with the trigger forwards and backwards screw

[nuggs]

It's the 1 that's covered with the trigger forwards and backwards screw

Yes but because it’s missing on mine ,I don’t know what the end is shaped like as there are a couple of different ones .

[rancidtom]

Have ordered a couple with tapered end and a couple flat end ! Can you say which one will be needed ? Thanks Mike.

Weihrauch use a "dog point" style but a standard V point would do fine in my opinion (so far not had to replace one but I better get a few spares in just in case I get a few HW100's with them missing in the next batch of repairs...)

[chrisisthe1@lycos.co.uk]

If you do get some could I buy one off you?

[nuggs]

If you do get some could I buy one off you?

Get on evil bay I’ve just ordered 3 for 99p delivered .

[nuggs]

Weihrauch use a "dog point" style but a standard V point would do fine in my opinion (so far not had to replace one but I better get a few spares in just in case I get a few HW100's with them missing in the next batch of repairs...)

Thanks for that Rancidtom .

[chrisisthe1@lycos.co.uk]

Thanks guys , I've ordered some so hopefully we will have a fully functioning 100 again