CP2 Barrel o rings.

[Retracted_Yeti]

Indeed it has Roy.

I don't own a CP2 but if you know the size then (from my experience of other barrel seals) viton 70 should do the trick, if the o ring has a softer feel then NBR might be better. What size is it mate as i have thousands of o rings and might just have a a few i could send. What colour are the o rings you have now?

Nice one Chris, the seals that came with the CP2 are almost a clear colour and 8mm i.d. by 0.8mm thick.

Thanks for the replies folks...

Cheers.

Roy.

[ChrisC]

Nice one Chris, the seals that came with the CP2 are almost a clear colour and 8mm i.d. by 0.8mm thick.

Thanks for the replies folks...

Cheers.

Roy.

I'll take a look Roy but pretty sure i don't actually have that size. The 0.8 thickness is a bit odd. I found 8 x 1 in Nitrile (Sh70)
https://www.polymax.co.uk/o-rings/rubber-nbr-oring/

I did find these though
https://www.polymax.co.uk/o-ring-7-9...nitrile-70-sha

[Retracted_Yeti]

I'll take a look Roy but pretty sure i don't actually have that size. The 0.8 thickness is a bit odd. I found 8 x 1 in Nitrile (Sh70)
https://www.polymax.co.uk/o-rings/rubber-nbr-oring/

I did find these though
https://www.polymax.co.uk/o-ring-7-9...nitrile-70-sha

Just ordered some 8x1 Viton Chris........dunno if they will fit.....but there's only one way to be sure!
May even be worth getting the barrel grooves taken up to a 'standard' size! perhaps.
Although I've just ordered 50 - 7.9 x 0.8 nitrile from the bay for under a £5....let's see eh!
(polymax were out of stock)

Thanks for the offer though mate....tis appreciated!

Cheers.

Roy.

[Retracted_Yeti]

Ok so, I've tried the 8mm id x 1mm o rings in viton........epic fail, breech basically cuts them to pieces!

Will see if the 7.9 x 0.8 I've ordered are any better.

In the meantime.........are the CP1 barrel o rings the same size???

Or anyone know where to order originals from?

SMK DONT deal with the public, so asking them is a waste of space and time.

Cheers.

Roy.