amadablam,
IIRC, the Magnetospeed V3's senstiivity needs turning up for air rifle use ( 8 or 9), and the bore to sensor spacing needs to be as small as possible.
The Magnetospeed V3 works superbly with centre & rimfires
Never tried it with air rifles.
Have fun
Best regards
Russ
Thanks for that 😊 I better do a bit of research on the models and suitability.
Thanks for that Russ
I would be delighted if I had one chronograph to do everything.
Would it be so easy 😊as I've rimfire as well as centre fires and it looks extremely capable for those.
Cheers
Just had an E-mail from Competition electronics ref The Pro-Chrono digital, I wanted one of their interface cable set up's.
Seems none of their kit is CE approved so should not be available over here but it's a superb bit of kit.
My chrono arrived a couple of weeks ago. I was disappointed to find that the Bluetooth App would not connect and after a few emails to the manufacturer i was told an updated app would soon be available for this unit so i decided to be fair and wait before posting a review.
The new app cam out a couple of days ago and i have been waiting for some half decent weather to make a quick test. It works fine with only the usual drawbacks to this type of chrono ie i had difficulty getting readings on a bright sunny day but with a slight overcast it works 100%. The range of the Bluetooth is a bit disappointing at only a couple of meters but that's OK as i want the chrono to be near the muzzle to get a truer reading. You can program all your favorite pellet makes into the app so when you select the pellet you are using you get instant FP readings.
More as i get more use out of it.
Cheers Ian