Ball point pens I've tried -the spring on the trigger is much smaller. I'll try raiding some old lighters and see if they're any closer. Cheers for all the replies if anyone finds one or finds the original sizes I'll try and get a few as spares.
Ball point pens I've tried -the spring on the trigger is much smaller. I'll try raiding some old lighters and see if they're any closer. Cheers for all the replies if anyone finds one or finds the original sizes I'll try and get a few as spares.
Doug,
Have you tried googling 'Julian Bond air arms spares'? He had a few bits I struggled to source for my Jackal (look at the AR prefix parts.
Hope this helps?
Chris
Falcon Raptor (FN12) Lighthunter - Walnut FX Cutlas - EB XVI - HW35 'Karbine' - BSA Airsporter MK4 - Webley Mk III - Relum Tornado - FWB Sport 127 Deluxe - Crosman 1322 custom - Sussex Armoury Jackal - BSA Superstar - Logun Eagle (All .22) and HW80 in .25
Cheers for all the replies. SideleverJohn sent me the dimensions of one of his springs -9mm long x 2.3 mm OD , I went to a local engineering supplies and picked up a few and the guns all working fine now. Luckily I got a few that I could trim to length as mine needed to be a bit longer than 9mm ' think I'm currently running about 15mm long and the springs I fitted were 2.7mm OD . Can always try trimming length to suit. If anyone ever needs any of these springs I've now got a supply of these so feel free to message me if you need one.