Any thoughts on the Webley Alecto ?
Any thoughts on the Webley Alecto ?
I have one. Bit of a handful but very accurate even with irons. Nice and quiet even without a mod fitted (mine's an early Mk so doesn't have the mod threading). 1 pump for close range, two or three (more usually 2) for longer range. Mine likes RWS Hollow Points.
Great power and accuracy which are obviously all elements of a great gun. Unfortunately for me I found it rather bulky and i'm not over nuts on the plastic finish although I do have an HW40 which is excellent. I also have the HW75 and i'd love to see the external beauty of that combined with the power of the Alecto. That would for me be the perfect combo.
I had one in .177 and .22 (but no more):
- Comfortable weight and balance
- Chunky anatomical grip is rather good
- Single pump is good for short range targets. Very easy cocking effort
- Two pumps is optimum for longer range targets. Moderate cocking effort
- On some variants the front sight rotates to help with the point of aim (for different pumps)
- Three pumps is pointless (too much effort for little gain)
- Multiple trigger adjustments are effective.
Things I did not like (on both calibres):
- Takes a couple of shots to get the trigger to settle in at the start of every shooting session (if you look at the internal 'cast alloy' parts you will understand why it could be somewhat variable).
- Spare seals are not listed by Chambers, only the entire valve and cylinder are listed (£120 plus post last time I looked ).
Worthwhile at a bargain used price The brand new price gives one year warranty on the guts/seals..
.then you are on your own
Treat Others As You Would Wish To Be Treated.
Only ever held one, not tried it properly on targets.
But, for the sake of being contrary....
Big, ugly, silly looking comic book thing. Like a Desert Eagle, but even stupider. Compare with an HW45, or old BSA Scorpion. Also a Crosman 1377/1322 will do almost everything the Zoracki "Webley" does at about half the price.
I'm biased. I dislike (a) huge pistols with rails and funny big grips with those ghastly finger grooves, and lasers and red dots and all that junk bolted on (b) any "Webley" not made in Birmingham.
It's probably OK. But I reserve my right not to like it.
Did I mention the Crosman 1377/1322?
...And a lot more pumping I had a 1377 and frankly the number of pumps required to get a full power shot took a lot of the fun out of it. Two pumps on an Alecto and you're there on around 5 fpe...meanwhile, back at the 1377...
For ease of use on paper punching, I like the Daisy 717. Nice long pump handle on the side, one stroke and its ready to go.
I purchased a new Zoraki/Alecto a few months ago. I was fairly impressed with it overall, the quality is pretty good and it's a good design. Pretty difficult to get the third pump into it, but two pumps is enough for most circumstances. The killer for me was the fact I couldn't hit anything with it. I tried and tried to shoot the thing accurately. Over the course of a few days I went back to it many times, never managed to shoot it any where as accurately as my Gamo Compact. Now idon't claim to be any kind of sharpshooter but I had better results with my HW45! I took the gun back to the shop where it was checked over and no problems were found. So I stuck with bit for about 300 more pellets, but just couldn't get on with it. I just couldn't shoot it remotely well. Now I'm positive that there was nothing wrong with that particular gun, and the problem was me. In the end I conceded and took it back again and managed to p/x it against a new Baikal IZH 46. This I could shoot amazingly accurately straight from the box. So I would suggest trying one before buying. John.
Theoben Fenman, Theoben Scirroco 2000, BSA Cadet Major, Webley Premier MK2, ASI Sniper!
Not quiet in my opinion, very loud bark unsilenced
I have a mk1, no threaded barrel. I sourced a new barrel (for a zoraki hp-01) from a french website, brought a half inch adapter (solway) and a silencer from Air-Fective Tuning, not the biggest but doesn't look stupid.
I think they are noisy without a silencer, no pronounced "bark".
I can hardly hit anything at 10M, eyesight and age not on my side.
Solware - Webley Alecto MK3 ½ UNF Silencer Adaptor
www.arprotech.com for barrel
I bought the TR Robb threaded barrel for my Mk1. You're right about the bark, it does have quite a crack, especially on three pumps. With a silencer on though they are spookily quiet. Put a Pax moderator on mine, quite large for a pistol but very light so it doesn't ruin the balance.
Good deals with these members