schimel, valuation

[hawkdriver]

Forgive me if I’m wrong, but the part that you describe as very stiff to slide sounds to me like you are talking about the cocking slide, just below the breech on the right of the pistol when pointed forward, the safety is the little button above the front of the trigger guard which moves right to left for fire and left to right for safe, I always advise users to be careful if using the safety button, because if you should put too much pressure on the trigger when it is safe you could break the trigger, it is very fragile.

Cheers Lawrie.

hi, yes you are right, its the cocking slide that is stiff, as you said the trigger looks fragile, but it does seem to be locked up, as said i'm sure it used to move freely,

its strange due to life changes and may be a different view of life, i have/had too much stuff i do nothing with, so its time to say goodbye to quite alot of it, hence the valuation.

[Benelli B76]

hi, yes you are right, its the cocking slide that is stiff, as you said the trigger looks fragile, but it does seem to be locked up, as said i'm sure it used to move freely,

its strange due to life changes and may be a different view of life, i have/had too much stuff i do nothing with, so its time to say goodbye to quite alot of it, hence the valuation.

I had a Schimel where the cocking slide was stiff. It was cause by the edge of an O ring poking through.The rubber O ring was interfering with slide action of the cocking button. It is unusual for the trigger to be solid, this only happens when the safety has been pushed across from right to left, blocking its movement. Even if the little trigger spring gets dislodged it still will move a little. Trigger very easy to remove and check condition underneath. (See safety blocking..)

[IMG][/IMG]

Baz

[DT Fletcher]

See the flickr album for all of the Schimel/American Luger/Carbo Jet paper that's in the collection. https://flic.kr/s/aHsm2675Co

Here's probably the rarest of the rare, in regards to Schimel paper. Although no known examples have ever appeared, the introduction flyer does exist.

schimel002 by Dean Fletcher - Photographer - Portland, on Flickr

[Benelli B76]

Its a pity the schimel website seems to be shut down, the family in California were making a good effort of supplying parts, and a very nice booklet of the history. In UK we have Lawrie Amatruda who has worked on over 100 of these and knows about the four variations on the valve unit. Would love to see these produced again using new technology and materials available today. The method of releasing the CO2 without the standard type valves on firing gives a satisfying crack, producing good power.

Baz

[Abasmajor]

[QUOTE=DT Fletcher;7413208]See the flickr album for all of the Schimel/American Luger/Carbo Jet paper that's in the collection. https://flic.kr/s/aHsm2675Co

Hi Dean,

Thanks for sharing the link to your Schimel paperwork collection some of which I haven't seen before.

A couple of questions.

1. Have you ever seen the AP22 variant documented in some of the associated literature ?

2. I notice that the pistol pictured on the box of my pistol uses slotted head screws whereas all the examples Iv'e seen and some literature use philips head screws. Have you seen an examples of the Schimel which uses the slotted head screws ?


Regards
Brian

[cinedux]

Spent years looking for one-to no avail. The only gun-maker I knew of who could squeeze more than one charging system (spring/piston /pump-up or a CO2 operated mechanism) into the one gun frame was........Mr Kenneth Pitcher of Healthways.That is why his 'Western Plainsman' is such a dinky collectable! Having said that, nowadays it seems skilled artisans have no trouble converting spring/piston powered units like Webleys and Walthers,into CO2 operated guns! Also,a number of USA-made products have and are being offered as pump-up or CO2 powered guns-even CO2 or PCP ones.Where will it ever end?

[DT Fletcher]

[QUOTE=Abasmajor;7413424]

See the flickr album for all of the Schimel/American Luger/Carbo Jet paper that's in the collection. https://flic.kr/s/aHsm2675Co

1. Have you ever seen the AP22 variant documented in some of the associated literature ?

2. I notice that the pistol pictured on the box of my pistol uses slotted head screws whereas all the examples Iv'e seen and some literature use philips head screws. Have you seen an examples of the Schimel which uses the slotted head screws ?

1- If memory serves, it was in the Shooter's Bible, although I could be confusing that with the Carbo Jet - which certainly was in the Shooter's bible. Be sure to read Smith's Gas, Air, and Spring Guns of the World which has some interesting information on this; especially about Swan taking over production.

2- I recall this particular subject coming up before. Can't recall if anyone came up with any real info. My take on it is that the box picture was likely of the prototype; certainly it would have been an early gun.

[Abasmajor]

[QUOTE=DT Fletcher;7414822]

1- If memory serves, it was in the Shooter's Bible, although I could be confusing that with the Carbo Jet - which certainly was in the Shooter's bible. Be sure to read Smith's Gas, Air, and Spring Guns of the World which has some interesting information on this; especially about Swan taking over production.

2- I recall this particular subject coming up before. Can't recall if anyone came up with any real info. My take on it is that the box picture was likely of the prototype; certainly it would have been an early gun.

Hi Dean,

Thanks for that.

Regards
Brian