Results 1 to 15 of 15

Thread: Artemis M16A

  1. #1
    Join Date
    Mar 2003
    Location
    Huddersfield, UK
    Posts
    1,652

    Artemis M16A

    Hi all.

    Does anyone have one of these? I'd like to know the shot count and if the bottle is removable .

    Thanks

    Rob

  2. #2
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    try verminhunters tv on youtube , Si has one for review . I have not watched it yet.

  3. #3
    Join Date
    Jan 2007
    Location
    takeley /Bishops Stortford Herts
    Posts
    6,726
    Quote Originally Posted by bighit View Post
    try verminhunters tv on youtube , Si has one for review . I have not watched it yet.
    I have BH and Si gives it the thumbs up its a good review imo.
    atb brian

  4. #4
    Join Date
    Dec 2004
    Location
    Prestwood, Great Missenden
    Posts
    276

    Artemis M16A

    Just watched Si's video and for a £399 rifle as he says, it's as accurate as anything costing £800 or £900 with a single hole 3 shot group at 27yds and one which would be coverd by a 6 pence piece at 55Yds. Might have to give this serious thought!

    Cheers, Phil
    THE BRAIN CANNOT ASSIMILATE WHAT THE POSTERIA CANNOT TOLERATE

  5. #5
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Quote Originally Posted by brian747 View Post
    I have BH and Si gives it the thumbs up its a good review imo.
    atb brian
    I started watching it and it does look good. Will watch it all later. Could be my first pcp if I don't get my mates s410.

  6. #6
    Join Date
    Jun 2010
    Location
    Accrington
    Posts
    3,585
    Watched the full video and you can't fail to be impressed, a lot of manufacturers will have to sit up and listen to what's coming out of China. I've been shooting a p10 for a while and the accuracy is up there, the stocks and seal quality lets them down though.

  7. #7
    Join Date
    Jan 2007
    Location
    takeley /Bishops Stortford Herts
    Posts
    6,726
    Quote Originally Posted by bighit View Post
    I started watching it and it does look good. Will watch it all later. Could be my first pcp if I don't get my mates s410.
    Hi BH, the s410 is also a cracking gun,
    it was my first pcp i had one for about 3 years
    and it was very reliable and consistantly accurate and i got loads of bunnies
    with that airgun it was in.22 cal, so i would think carefully about the s410.
    atb brian

  8. #8
    Join Date
    Jan 2007
    Location
    Newport, Gwent
    Posts
    950
    I have one in stock , looks to be a very good for the price stock is a bit bland but at the price you have to expect that. I dont think you can remove the bottle it looks to be like the Daystate rifles with no valve in it . You fill it the same as the
    Daystate the only problem is that you have to fill the bottle using the gauge on your tank, the gauge on the rifle is for the regulator pressure . I dont know how many shoots you will get this is will be down to the calibre and power setting ect., but it should be good looking at the size of the bottle. The trigger is good and its very accurate took it to my local club for people to try and they were impressed with it.
    .22 Venom Mach 1 (FAC) 6-25x56 Millett.
    .22 Venom Mach 2 Thumbhole 6.5-20x40 Leupold EFR.
    .22 Venom Mach 2 Sporter 4-12x40 Leupold.
    .177 Venom Vantage 4-16x50.
    .177 Venom Daystate 8-32x56 AGS.
    .22 Venom Datstate 4-16x56 AGS.
    .22 Webley Venom FX2000 6-18x40 Busnel Legend.
    .177 Titan MPT by Steve Pope 6-24x40 Tasco.
    .177 Pro-Sport 4-16x50.
    .22 Webley FX2000 3-9x33 Leupold EFR.
    .177 Logan Solo 4-16x50.
    .22 HW90 (spring powered) 4-16x50
    .22 Gamo Stutzen.
    .177 Walther lever action.

  9. #9
    Join Date
    Oct 2009
    Location
    aberdeenshire
    Posts
    25,209
    Quote Originally Posted by brian747 View Post
    Hi BH, the s410 is also a cracking gun,
    it was my first pcp i had one for about 3 years
    and it was very reliable and consistantly accurate and i got loads of bunnies
    with that airgun it was in.22 cal, so i would think carefully about the s410.
    atb brian
    Hi Brian. It's a pre anti tamper model in a craftsman vit bullpup stock.

    My mate has not got the time for shooting now although he wants my shotgun so I will swap him.

    Rifle ,charging set and scope.

  10. #10
    Join Date
    Jan 2010
    Location
    Hull
    Posts
    1,084
    As try as I may I can not see them with a buddy bottle,
    there's plenty with a cylinder I recon the one Si is showing is the new version.

  11. #11
    Join Date
    Apr 2018
    Location
    Manchester
    Posts
    14
    Just echoing what has already been said really but Si really liked the look of it.

  12. #12
    Join Date
    Jan 2007
    Location
    takeley /Bishops Stortford Herts
    Posts
    6,726
    A lot of people whine about these cheaper guns, but not everybody has the funds to buy FX &Daystate airguns so if these cheaper guns do the job imo thats fine, i own kral breaker bullpup mine works fine ,i also own a hatsan at4/10 .177 bullpup this all so shoots fine, so i may try this M16 artemis in.177 very soon.
    atb brian

  13. #13
    Join Date
    Feb 2015
    Location
    Bristol
    Posts
    177
    Quote Originally Posted by KeithS View Post
    As try as I may I can not see them with a buddy bottle,
    there's plenty with a cylinder I recon the one Si is showing is the new version.
    The M16 is the standard cylinder version; the bottle version is the M16A, like here:
    https://www.gunstar.co.uk/artemis-m1...ir-Guns/998966

  14. #14
    Join Date
    Feb 2006
    Location
    Farnborough
    Posts
    4,394
    Quote Originally Posted by Squirreler View Post
    Just watched Si's video and for a £399 rifle as he says, it's as accurate as anything costing £800 or £900 with a single hole 3 shot group at 27yds and one which would be coverd by a 6 pence piece at 55Yds. Might have to give this serious thought!

    Cheers, Phil
    How big is a 6 pence piece?????
    WANTED: Next weeks winning lottery numbers :-)

  15. #15
    Join Date
    Sep 2007
    Location
    Hull
    Posts
    2,376
    Quote Originally Posted by averageplinker View Post
    How big is a 6 pence piece?????
    The same size as a tanner.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •