Hawke Panorama 3-9x50, solidly mounted on PCP. Pellet hits centre at 30 yds but one inch to the left at 40 yds. I think the mounts are true is there any other likely culprit ?
your views sought, thanks Steve
Hawke Panorama 3-9x50, solidly mounted on PCP. Pellet hits centre at 30 yds but one inch to the left at 40 yds. I think the mounts are true is there any other likely culprit ?
your views sought, thanks Steve
Good deals with Mark3HuntsmanSam, Cannon Fodder, Guy, Jon, Peddy, Negotiator, Devon Shooter, Ninapuppy, Custard 1, Bob Brown, TopDog, Dave The Frame, / Sam99, Ballie, Nautilus21, edbear2, eredel, among others
Check the pellet is not spiralling! Been there before
What's it like at say 20 yards or a bit closer. Does it shoot off to the opposite side. Maybe the barrel has had a knock, if supported by a barrel band. Have you compared with another scope and mounts to see if the same happens.
Slightly canted scope or rifle?
All of the above.
Would swapping the mounts over so dovetail clamp is on the side to see if the problem persists.
Is the scope parallax adjustable? I've had scopes where the poi describes a circle as you adjust PA....
Best Regards
Simon
I've got some slug guns.