Results 1 to 15 of 35

Thread: Howa 1500 .308win

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Join Date
    Sep 2005
    Location
    Sevenoaks, Kent
    Posts
    298
    i went for a semi fancy grade walnut dual grip stock, with rosewood tips and caps. varmint forend.

    cant wait.

    the pillars might actually be very helpful, did you open up the holes much?

    if so just with a standard drill bit?

  2. #2
    Join Date
    Mar 2004
    Location
    Berks Bucks Borders (Slough)
    Posts
    1,653
    Quote Originally Posted by dunganick
    i went for a semi fancy grade walnut dual grip stock, with rosewood tips and caps. varmint forend.

    cant wait.

    the pillars might actually be very helpful, did you open up the holes much?

    if so just with a standard drill bit?
    Just a little, as the lightweight is Soooooo light it's soft

    Just used a piller drill (Duh!) with the stock upside down, then a little finishing with a large rat tail file, the front is a tight fit and the rear stays in but can slide out when pushed with a pencil etc. I did this to stop the stress' opening up the stock anymore

    If you were closer I could have made the pillars up for you on the lathe

  3. #3
    Join Date
    Sep 2005
    Location
    Sevenoaks, Kent
    Posts
    298
    yeh, shame

    i have a tame gunsmith who will do the pillars for me i think.

    hopefully the wood wont be so soft on my stock, and the spliting issue wont arise.

    your stock is looking very good , i look forward to some pics tomorrow.

  4. #4
    Join Date
    Mar 2004
    Location
    Berks Bucks Borders (Slough)
    Posts
    1,653
    Quote Originally Posted by dunganick
    yeh, shame

    i have a tame gunsmith who will do the pillars for me i think.

    hopefully the wood wont be so soft on my stock, and the spliting issue wont arise.

    your stock is looking very good , i look forward to some pics tomorrow.
    You'll have to wait spent the day sorting out some shooting land

  5. #5
    Join Date
    Sep 2005
    Location
    Sevenoaks, Kent
    Posts
    298
    ah well, at least it was a good cause.

    just found out im looking at a wait untill mid march to get the action.

    fox firearms hasnt got any

  6. #6
    Join Date
    Mar 2004
    Location
    Berks Bucks Borders (Slough)
    Posts
    1,653
    Tell you what those stocks need a damn lot of work

    100 paper blocked down, wet cloth, then 220 hand finished (no blocks), wet cloth, 330 hand finish, stain, oil, hand stipple grip, oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oi l,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil, oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oi l,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil, oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oi l,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil, oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oi l,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil, oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oi l,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil,oil, oil,oil,oil,oil,oil,oil,oil,oil,

  7. #7
    Join Date
    Sep 2005
    Location
    Sevenoaks, Kent
    Posts
    298
    pics?

Similar Threads

  1. Swarovski 1500 L/rangrfinder, Who Has 1 ?
    By JSD in forum General Airgun.
    Replies: 1
    Last Post: 12-06-2006, 09:33 PM
  2. Swarovski 1500 L/rangrfinder, Who Has 1 ?
    By JSD in forum General Airgun.
    Replies: 1
    Last Post: 14-04-2006, 10:33 PM
  3. which £1500 pcp combo
    By andy_scouser in forum General Airgun.
    Replies: 35
    Last Post: 10-08-2004, 08:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •