Pellet head dia
Waiting for the olympics to kick in and having time to spare I weighed a tin of AA diabolo's 4.52 and then because of curiosity ran 60 through a pellet gauge to check their head dia.
I had noticed that some seemed a bit loose in the barrel of my FTP900 and HW97 in the past and if the barrel was inclined up some fell out.
Immediately the gauge showed the 4.52 pellets were in fact 4.48 with a few at 4.49, although quite consistant with the spread; but very confusing as I always assumed when the tin said 4.52 thats what they were, not as small as shown by the gauge.
So to get pellets of 4.52 (if they would improve accuracy) I might start to try 4.53 or 4 to match the rifles barrel. Assuming that that is 4.52?
Now it seems I need to get a bore gauge.' Are there any pellets that are in fact 4.52?
HERX77 .
Last edited by Herx77; 14-02-2018 at 10:11 PM.
Fighter against the "Dark Arts" A stranger in an even stranger land.
GC2+Leupold 14.4-34x45
AA400 fac receiver+sidewinder 8.5-34x52
Weihrauch HW77k fiddled with and doing what it wants to +Zeiss 3-9x36.
Weihrauch HW90k
Weihrauch HW97k learning from above,now sporting a Maccarri 77/97 target stock..+Bushnell 3200.Go on shoot one you know you want to
Daystate mk3 RT Delux + bushnell 4200 8-24x 40Does what it should again & again.
Fwb 124 + Optima was good is good!
Webley Vulcan.