FWB grease is used on their v expensive guns.
Best fittings sell lube for probe o rings.
I have used a bit of the latter on a BSA probe to ease it ,and a friend highly recommends FWB grease.
Generally I don’t bother.
Reading some conflicting information regarding whether or not to use any form of lubrication on o-rings and threads on fill adapters. Talking of miniscule smear of safe products to help o-rings seal/avoid tears, and avoid wear on threads.
The guidance from Bisely states NONE at all:
http://www.bisleycountryblog.co.uk/h...ng-a-cylinder/
Other sources advise occasional fractional amount of silicone grease on o-rings - but of course must avoid any contact with metal parts/threads.
Other sources advise use of 'Special Gun Grease' (e.g. Feinwerkbau) possibly on seals and threads.
Appreciate your views on best practice.
Treat Others As You Would Wish To Be Treated.
FWB grease is used on their v expensive guns.
Best fittings sell lube for probe o rings.
I have used a bit of the latter on a BSA probe to ease it ,and a friend highly recommends FWB grease.
Generally I don’t bother.
Treat Others As You Would Wish To Be Treated.