-
RWS Pump
While I am repairing my Stirrup pump-This is probably a stupid Question,But I am not sure- Could I connect pump to an old wheel barrow inner tube just for test purposes rather than keep connecting to my rifle ??
-
RWS Pump
well for a start you'd need the correct connector as the thread size will be different,I would just conect it to the gun as the low pressures on a barrow tyre won't tell you whether the pump is working at high pressures.
-
pump
Thanks Junglie,so it wont damage the rifle?
-
RWS Pump
No I doubt it, but you may have to cock the bolt so you can get air in to start with if it's completly empty.On some pcps the hammer can hold the firing valve open if the guns empty, causing the air to just go straight out the barrel when using a hand pump.
-
pump
No the rifle is full at the moment, Normally use about 3 mags and top up its an AA S200
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules