Its unmodified, the crown is recessed inside the plastic outer barrel. Will have a lookski...
Period scope
Does it still work ?
wondering what is that pistol you were talking about?
If it has open sights, what's it like with those ?
Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177
Have you put it over a chrono yet?
Good deals with these members
I have no experience with this particular model, Al.
But, a couple of thoughts:-
Firstly, as mentioned, some often say that Crosman barrel crowning can be very variable.
Secondly, I'm wondering if the barrel is "fixed" at the breech end with the flimsy grub screw arrangement, as per the 766/2100 rifles and whether this has worked loose?
THE BOINGER BASH AT QUIGLEY HOLLOW. MAKING GREAT MEMORIES SINCE 15th JUNE, 2013.
NEXT EVENT :- August 3/4, 2024.........BOING!!
It's a reet weird contraption with the 'straw' barrel cast inside a plastic liner. It was made to look like the Winchester Model 70 so it is the full 'Hemingway' but it shoots shite.
I will try the pushing the pellet through idea, nice one. Might not be able to get to the crown as it is recessed.
try using pellets of the correct calibre...
Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.
Was going to mention crown also. Have you cleaned the bore? Someone may have been shooting silly plastic pellets through it, or there might be damage to the rifling.
Good deals with these members
Push a pellet through it slowly with ansoft metal or plastic rod and look for loose or tight spots being especially mindful of the transit through the barrel crown.