Results 1 to 5 of 5

Thread: Steyr mag adjustment

  1. #1
    Join Date
    May 2012
    Location
    warminster
    Posts
    192

    Steyr mag adjustment

    Can anyone with a hunting 5 tell me what tool or Alan key size I use to adjust the mag fitting tightness ? Just donít want to round anything off if I have to do it .Thanks .

  2. #2
    Join Date
    May 2014
    Location
    Manchester
    Posts
    473
    On my rifle I use two 2.5mm allen keys that are carefully cut down (and covered with plastic heat shrink) so I can adjust the magazine play without removing the scope, although you do have to be careful when first fitting the scope mounts that they don't obscure the adjusting screws.

  3. #3
    Join Date
    May 2012
    Location
    warminster
    Posts
    192
    Quote Originally Posted by Gunfun View Post
    On my rifle I use two 2.5mm allen keys that are carefully cut down (and covered with plastic heat shrink) so I can adjust the magazine play without removing the scope, although you do have to be careful when first fitting the scope mounts that they don't obscure the adjusting screws.
    Thanks Gunfun ,on the exploded diagram at the back of the user manual they say they are slotted set screws m5x6 !!! What are they ? Cheers

  4. #4
    Join Date
    Jul 2000
    Location
    Shebbear, N Devon
    Posts
    12,921
    Mine had hex head.
    www.shebbearshooters.co.uk. Ask for Rich and try the coffee

  5. #5
    Join Date
    May 2012
    Location
    warminster
    Posts
    192
    Quote Originally Posted by Rich View Post
    Mine had hex head.
    Yep,although it says slotted set screws they are in fact hex screws ! Unless thatís what it means

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •