Will Theoben Rapid barrel fit on BSA Ultra?

[greenwayjames]

I did also say sell the barrel and buy a blank.

Where from? Not so easy to get now. Chambers do Walther blanks but these are almost £120 plus post to an RFD who would charge a handling fee.

[MartynB]

Where from? Not so easy to get now. Chambers do Walther blanks but these are almost £120 plus post to an RFD who would charge a handling fee.

Can't you buy directly from LW ?

Edit: Just looked on their site, there's quite a few UK dealers listed

[Rapid7Nick]

Where from? Not so easy to get now. Chambers do Walther blanks but these are almost £120 plus post to an RFD who would charge a handling fee.

A specific made up barrel for an air rifle yes, but not blanks. Have had blanks before from chambers that were delivered straight to my door and no RFD needed.

You can get Weihrauch blanks from Silco direct to your door for around half the price of LW blanks.
http://silco.co.uk/categories/WEIHRAUCH-BARREL-BLANKS/

[jirushi]

Thanks for the replies gents and sorry for my late reply. I have done some more research. The .25 barrel turned out to be a LW blank; outer diameter is 16mm, and BSA barrels are 15.4. A machinist will modify it to fit my BSA pcps, using a .25 Ultra barrel as an example. The .20 barrel is a Rapid barrel. I will sell it on, as I think it would be a shame to modify it. As you point out. And making a .20 probe and probe guide for my BSA's is possible, but I've spent enough this month on airguns and related items haha. So that's it

[averageplinker]

Have fun with your .25" project

[jirushi]

Thank you
It is going well so far.
I am using a 15.2" .25 Scorpion barrel on the Ultra. With a 250mm cylinder. 10 more or less consistent shots at 20 fpe. Excellent accuracy, I tested up to 60 yards.
With the 24" barrel, I assume the power and shot count will be higher. There are 325mm and 425mm cylinders on their way. And a huma reg. That goes up to 155 bars, we'll see.
But I do like .25.
Best regards, Louis

[riku]

Thank you
It is going well so far.
I am using a 15.2" .25 Scorpion barrel on the Ultra. With a 250mm cylinder. 10 more or less consistent shots at 20 fpe. Excellent accuracy, I tested up to 60 yards.
With the 24" barrel, I assume the power and shot count will be higher. There are 325mm and 425mm cylinders on their way. And a huma reg. That goes up to 155 bars, we'll see.
But I do like .25.
Best regards, Louis

With 24" barrel and 425mm cylinder you could easily reach 60 fpe for around 10 shots if you want. That would be an excellent setup for 100M shooting with JSB Kings or King Heavies

[jirushi]

With 24" barrel and 425mm cylinder you could easily reach 60 fpe for around 10 shots if you want. That would be an excellent setup for 100M shooting with JSB Kings or King Heavies

Thank you Riku. I see in your signature that you are experienced with powerful BSA's, nice.
60 fpe would be nice. I think I'll sell my Bobcat then.
I've just bought a Techstar and Lonestar as well. I feel a bit lucky. And like a bragger. Sorry. It is not intentional. But I have been looking for a long time and then someone has a whole collection of them and is prepared to sell 2... Great
I need to sell the Bobcat btw, I can hear my bank account crying.