An Airgun O Ring database

[aris]

What format is it in? Excel spreadsheet?

[Rickenbacker]

Hi Phil,

Can I add this chart for the Falcon FN series:

8ugYjsa.jpg



and please let me know if you want this thread moved to the 'useful' section? http://www.airgunbbs.com/forumdispla...-Shooting-Tips

[Phil Russell]

Hi Phil,

Can I add this chart for the Falcon FN series:

8ugYjsa.jpg



and please let me know if you want this thread moved to the 'useful' section? http://www.airgunbbs.com/forumdispla...-Shooting-Tips

Hi Rickenbacker
I have no objection at all to you adding to the thread nor of moving it to a better position. The thread is there for peoples' information and I am very happy for it to be put where it can do the most good.

Cheers, Phil

[YorkshireDave]

A&M Cylinder Fill Probe (HW100) 4mm ID x 2mm thick.

At least now it's recorded here I'll be able to lose the bit of paper I had it written on without beating myself up too much over it.

[YorkshireDave]

This thread's going to become increasingly useful the more it gets added to, but at some point someone will need to consolidate the data, tidy it up or whatever.

The O ring supplied with my HW100 Huggett shroud seems to be 14 x 1.5. Note that's different to the 13 x 2.5 listed elsewhere in this thread.

[Phil Russell]

This thread's going to become increasingly useful the more it gets added to, but at some point someone will need to consolidate the data, tidy it up or whatever.

The O ring supplied with my HW100 Huggett shroud seems to be 14 x 1.5. Note that's different to the 13 x 2.5 listed elsewhere in this thread.

I will do my best as and when data are added. I have not done the Falcon table as I expect it is fine as it is. As for the HW100 Huggett shroud, I have added your measurement but could not find the 13 x 2.5 item ... maybe a senior moment? (mine!).
Thanks for support, Phil

[Paddler]

Loading Bolt Probe O-Ring CZ014 3x1mm (.22 & .177)

Airtube seals 21x2 mm

Seal at firing valve end 6.5 x2mm

Magazine pellet retaining rings .177 12x3.5mm & .22 11x3.5mm

I'm finding the Simply Seals site very useful and very good value with the proper grade of NBR for us i.e. Shore hardnes 70

https://www./itm/112945880277