Fx cylinder / Btas HW100 help
Work is progressing well on my newly acquired btas HW100.
To be fair to the previous owner, it’s in vgc and I’m happy with it.
Unfortunately it has sprung a small leak, but hey if you own a pcp long enough your going to have to deal with a leak or two.
I’ve tracked it down to the hw to fx adaptor.
I’ve changed the o ring on the hw block side but it seems as though the leak is coming from the fx cylinder to adaptor side.
Now here’s the bit I need help on. What is under the cylinder to adaptor side? Is there an o ring, a seal? Anyone ever come across this and had to change whatever it is?
It’s a small leak, I’ve charged to 200 bar on the gauge and leaving it overnight to see how much has escaped but I really don’t think it is a lot.
Any help on what I need to replace on the tube side would be hugely appreciated as I want to go out and play with it 😂
Kind Regards,
Rhys
Theoben TTR1 .177, Steven B Blue/Grey Laminate Stock, Nutshot Mod, Hawke Sidewinder 10x42 Tac IR
Daystate Pulsar. 177, Donny FL Sumo Mod, Pard NV008LRF