Reply With QuoteSurely you can measure where it sits to get the dia & get the thickness from one of the sections
Emma's Dad
Upon pulling my mod' apart I have found the "O" ring to be in bits. It is the full length version. I have tried a Google search but can't find anything, does anyone know what size replacement I need to buy please? If it makes any difference it's off an Airwolf.
Thanks,
Gary.
Registered User
Surely you can measure where it sits to get the dia & get the thickness from one of the sections
Emma's Dad
I have already done this but by my measurements the barrel diameter is 13mm and the diameter of the inside of the moderator is 21mm making a 4mm cross section which seems way too big. I should have picked up a piece of the old "O" ring to measure but I didn't think until later and the floor has been swept since, hence the reason why I'm trying to get some info from here.Originally Posted by angrybear
Surely you can measure where it sits to get the dia & get the thickness from one of the sections
Last edited by gtfreight; 29-04-2018 at 11:52 AM.
Emma's Dad
I have just been on the phone to Hugget and they are posting me some "o"rings foc which is very kind of them. Incase any one else has one fail and they have some "o"rings in a drawer the size is 13mm id x 2.5mm cs making the od 18mm.
Just as well I didn't trust my own measuring.
Mushroom Man
Thanks for the info ... I have added it to the O ring database.
Cheers, Phil
Registered User
Mushroom Man
About 6 weeks or so ago I set out my O ring database on here. There was initially some interest in people adding to it but I think that interest sort of fizzled out. But my database is still here, in 'General'. Try a search on my name and 'O ring database' and I am sure you will find it.
Cheers, Phil
Emma's Dad
I have just got home from work to find an APC"Overnight Delivery" package on the kitchen table with a bag of "O" rings.
You can't knock that for aftersales service.
A massive thank you to Hugget Precision Parts.
Emma's Dad
Fitted now and all is fine with the gun again.
Posting Permissions