CP1-M bolt problem

[clive s 400]

I had a problemwith the mags --one of the little magnets underneath was not glued on flat and it sticks

[LewesNick]

The magnet was a bit proud on the tray so a punch was applied. This made a slight difference in that I no longer need two hands to close the bolt but it still needed more than one finger to close. Also checked the magnet on the pistol.

On the old tray it is 3.93mm thick measuring from the bottom of the trough. The new one is 3.87mm.

Slick as a very slick thing now.