Results 1 to 5 of 5

Thread: Barking HW77K

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 15-04-2018, 03:53 PM #1
    Hsing-ee's Avatar
    Hsing-ee
    Hsing-ee is offline may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
    Join Date
    Dec 2001
    Location
    Glasgow
    Posts
    18,273

    Barking HW77K

    No, it is not suffering a breakdown. When fired it is quite sudden, not as sharp as a V-Mach, but makes a kind of bark, a bit like a buzz but very short. It is accurate enough but I don't like it.

    I have no idea which spring/guide setup I have in there. Which is the softest spring, a OEM job? Or a Maccari? I have a box of springs and guides and I foolishly didn't mark down which is which so I am going to have to go through the lot to find a sweeter one if this is the source of the problem.

    It is a 25mm piston Mk 2 with a Dave Hall buttoned piston and chamber, very smooth to cock.

    The stock is a plastic KT, could it be the hollow stock reverberating? I might go back to a wood stock as the balance is a bit front-heavy.
    Last edited by Hsing-ee; 15-04-2018 at 04:05 PM.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules