Results 1 to 3 of 3

Thread: smk pp700w. pistol question.

  1. #1
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    1,116

    smk pp700w. pistol question.

    Hello have just purchased one of these and fitted a Huma regulator. What I wish to know what is the correct fill pressure please. There seems to be various pressures quoted IE. anything from 200 bar to 250 bar, yes really, safe pressure printed on reservoir 220 bar. Also the reservoir made out of titanium, stainless etc.?
    Thank you.
    Cheers.
    Geoff.

  2. #2
    Jesim1's Avatar
    Jesim1 is offline Likes to wear driving gloves in the bedroom
    Join Date
    Dec 2013
    Location
    Wigan
    Posts
    4,939
    I'd go with 220, that is what was printed on both of mine and I filled to also. I'm sure the cylinder will be aircraft grade aluminium - it's definitely not titanium on an SMK!

    James
    Making a mockery of growing old gracefully since I retired

  3. #3
    Join Date
    Dec 2012
    Location
    Bristol
    Posts
    1,116
    Thank you very much, I looked at the 250 bar that was supposed to be ok and thought that was a NO. Titanium also a No because of the cost.
    There was no instructions, info. in the box. (New).
    220 it will be. I must say the Huma is a vast improvement on the standard fitting but if fitted as standard would put the price up rather a lot.
    Thanks again.
    Cheers.
    Geoff.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •