Usability of DOA 600 reticle for airgun shooting?

[lensman57]

If I have found the correct reticule then the first hash mark is approximately 1.5 MOA, the 2nd one is 3.5 MOA, the 3rd one is 6.2 MOA, the fourth one 9.6 MOA and the last one is 13.7 MOA.
Now these are all assumptions based on your gun being about 40 ft.lbs using a JSB King pellet, BC 0.035 and zeroed @ 35 yards, if so then the 1st hash mark corresponds to about 43 Yards, the 2nd to about 52 Yards, the 3rd one to about 62 Yards and then 74 Yards and the last one to about 84 Yards.
In reality you should really test these in the range.
The scope is also has to be set at its designated Mag usually the MAX Mag available for the values to be true. If not then you will have to interpolate the marks.
Hope this helps.

A.G

[jirushi]

If I have found the correct reticule then the first hash mark is approximately 1.5 MOA, the 2nd one is 3.5 MOA, the 3rd one is 6.2 MOA, the fourth one 9.6 MOA and the last one is 13.7 MOA.
Now these are all assumptions based on your gun being about 40 ft.lbs using a JSB King pellet, BC 0.035 and zeroed @ 35 yards, if so then the 1st hash mark corresponds to about 43 Yards, the 2nd to about 52 Yards, the 3rd one to about 62 Yards and then 74 Yards and the last one to about 84 Yards.
In reality you should really test these in the range.
The scope is also has to be set at its designated Mag usually the MAX Mag available for the values to be true. If not then you will have to interpolate the marks.
Hope this helps.

A.G

That's very interesting A.G. Many thanks for that. I've come across a Mamba Lite and I've decided to stick with that, also because of the slightly better price. But one day I'd love to try a good Bushnell. Cheers, Louis