I need to strip a Huntsman Mk11, to replace the seals ,do I need any special tools?
I need to strip a Huntsman Mk11, to replace the seals ,do I need any special tools?
God has a hard on for green rifles
I stripped my mk1 without any special tools about twenty years ago!, Some muck had come through at speed and caused a leak, I removed the valve, Spun it in my lathe and used fine emery cloth to remove the scratch and it's still ok today!!
I'm pretty sure only the receiver was changed from round steel bar to aluminium square lump
John
for my gunz guitarz and bonzai, see here
www.flickr.com/photos/8163995@N07/
I did ask on the Daystate forum and I was told by Daystate that there were two specialist tools needed but they can't supply them, which is fair enough. However I'm not paying £67 per hour labour.
Has anyone had any hands on experience stripping a Huntsman MK11 ?
God has a hard on for green rifles
PM me your email address and I will send you some information I downloaded from another site