may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
Has anyone done sanding a stock inside a plastic bag to stop dust inhalation and to expedite the process with the least amount of mess?
I know walnut wood dust can be carcinogenic and its advisable to sand this outdoors and using a mask, it would be better to bag the whole thing up. I havent seen mention of this idea on the web, wondered if anyone had tried it.
Guest
Build a sanding cabinet and use a vacuum cleaner to sook up the dust ?
large cardboard box ,clingfilm for a window and a hole in the box for the vacuum cleaner to sook the dust out and armholes for you sand the stock. like a diy blasting cabinet.
Or one of these https://tools-paint.com/mirka-handy-...er-46551-p.asp
may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
Ah yes, a cardboard cabinet is a good idea....Originally Posted by bighit
Where's his User name?
I like to wait for a nice day and sit outside. I don't sand too much anyway. If you strip varnish using a knife, there's minimum sanding involved.
Donald
Muddled
I once sanded a stock in a plastic bag.
I nearly suffocated.
ATB
Ian
Founder & ex secretary of Rivington Riflemen.
www.rivington-riflemen.uk
Registered User
Give us a shout next time........we will tie it tighter for youI once sanded a stock in a plastic bag.
I nearly suffocated.
ATB
Ian
Even better looking than a HW35
Oh well, that's me in an early grave then, I just sanded all my stocks in the shed, no mask or dust extraction device.
Looks like the wife might be outliving me after all
Pete
Far too many rifles to list now, all mainly British but the odd pesky foreigner has snuck in
may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
Nah, if you have been drinking Hampshire water all these years and you are still alive a bit of Mercury stock dust isn't going to do anything...Oh well, that's me in an early grave then, I just sanded all my stocks in the shed, no mask or dust extraction device.
Looks like the wife might be outliving me after all
Pete
Registered User
I use a cabinet scraper. If you haven’t used one before, there’s a knack to getting an edge, but it’s a skill once learnt that you’ll wonder how you ever managed without one. YouTube it, you’ll be glad you did.
Without exaggeration, my cabinet scrapers are my favourite tools - and I have an embarrassing number of tools.
may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
I think I had a scraper before - it was a flat piece of spring steel, unfortunately it got rusty at some point. I wasn't reall sure how to use it, was bothered it might make things too flat & polygonal. Must be a technique thing. Time to invest in a new one.I use a cabinet scraper. If you haven’t used one before, there’s a knack to getting an edge, but it’s a skill once learnt that you’ll wonder how you ever managed without one. YouTube it, you’ll be glad you did.
Without exaggeration, my cabinet scrapers are my favourite tools - and I have an embarrassing number of tools.
Registered User
Didn't have a clue about the walnut thing. I'll put on a nicotine patch when I refinish that tatty hatty
Registered User
I have been working with wood for years, breathed in loads of dust, might get cancer, more likely to die of lead poisoning from the pellets though.
Bb
may also be employed in conjunction with a drawn reciprocation dingle arm, to reduce sinusoidal repleneration
It's the dust from walnut that is carcinogenic, with pine and beech etc you should be OK, and you should be alright with the lead, as its in its pure metal form and not some soluble compound.
Posting Permissions
Reply With Quote
