Quote Originally Posted by bezzer View Post
The "spike" at 110 bar is when it's coming off the reg
Don't understand what 'off the regulator' means.

Quote Originally Posted by bezzer View Post
The gun settings you've got at the moment are working at their most efficient meanjng the reg is set a touch too high you get a few higher power shots then it drops right off.
Do you mean the reg is currently set higher than 95 bar (indicated on the reg body), and is closer to 110 bar?

Quote Originally Posted by bezzer View Post
Turn it down just a very small amount then do another string and see what that gives you. When you get a flat string you're at optimum reg pressure then you can start altering the other bits to get the power you want from that reg pressure
What do you mean by a flat string... same FPS, no variation throughout the complete no' of test shots? Sorry if I seem thick

I was hoping I wouldn't have to touch the reg again. It's an internal reg and I hate pushing it past the internal cylinder threads. It's quite hard to push it past the threads and it feels like you're going to knacker the outer body 'o' ring on the reg. Ah well if needs must