Page 1 of 2 12 LastLast
Results 1 to 15 of 18

Thread: Parker Hale Dragon

  1. #1
    Join Date
    Jul 2008
    Location
    Hollesley, near Woodbridge
    Posts
    2,796

    Parker Hale Dragon

    I just bought one of these and am very pleased with it, has a lovely grained stock with QD studs well fitted and the overall condition is very good for it's age. I was also surprised it wasn't heavier, it seems to have a nice balance

    My question is, does anyone specialise in these, I'd like advice before messing with it ? The bolt knob doesn't seem to be fixed to the bolt itself, the muzzle barrel block isn't present which I suspect was removed to fix a silencer adapter which the rifle came with

    Thanks to Phil Russell for the manuals he freely gave to me
    Last edited by MartynB; 17-05-2018 at 07:32 AM.
    Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177

  2. #2
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    From memory, I think this member may be able to help you, Martyn. :-

    http://www.airgunbbs.com/member.php?118393-JustinThyme




    All the best Mick

  3. #3
    Join Date
    Aug 2014
    Location
    BARNARD CASTLE
    Posts
    146

    Parker hale dragon..

    Keith Wylde.
    Bought a dragon of Keith some years ago. (still have it) At the time he refurbished these as well as JB!s.
    His_email address...... keith.wylde@yahoo.co.uk

  4. #4
    Join Date
    Jul 2008
    Location
    Hollesley, near Woodbridge
    Posts
    2,796
    Thanks for info guys, appreciated, I've mailed Keith
    Custom BSA S10 .22 PAX Phoenix Mk 2 .22 Custom Titan Manitou .22 (JB BP) HW77 .22 FWB Sport Mk1 .22 Sharp Ace .22 Crossman 600 .22 Berretta 92 .20 Desert Eagle .177

  5. #5
    Join Date
    May 2008
    Location
    Quigley Hollow, Nuneaton
    Posts
    17,111
    Quote Originally Posted by MartynB View Post
    Thanks for info guys, appreciated, I've mailed Keith
    Yes, Keith's the man.

    I must contact him myself sometime as I need a complete pump arm and stock for my Dragon.

  6. #6
    tinbum's Avatar
    tinbum is online now Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,389
    Just tagging onto this thread, but........

    My Mk2 has an issue where the scope rail is out of line with the barrel. The barrel is straight, the main body tube is straight, but the breech just isn't in line. It's not glaringly obvious and its only after zeroing and finding the pellets striking out to the right the further out you shoot that makes it apparent.
    The gun is flawless in every other respect and the stock has been beautifully restored, but I'm pulling my hair out with this issue.

    Can I get a mount thats adjustable for windage? I just want to get it sorted before I inevitably sell it!
    God rest ye jelly mental men

  7. #7
    Join Date
    Oct 2008
    Location
    Bude
    Posts
    805
    I’ve got a set of 25mm medium one piece fully adjustable mounts you can borrow,just to see if it cures the issue

  8. #8
    tinbum's Avatar
    tinbum is online now Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,389
    Quote Originally Posted by shakeysimon View Post
    I’ve got a set of 25mm medium one piece fully adjustable mounts you can borrow,just to see if it cures the issue

    Ooh, yes please!
    God rest ye jelly mental men

  9. #9
    Join Date
    Oct 2008
    Location
    Bude
    Posts
    805
    No worries I’ll drop it over at some point over the weekend

  10. #10
    tinbum's Avatar
    tinbum is online now Killer Vampire Lesbians on scooters
    Join Date
    Aug 2007
    Location
    Daarn Saaarf!
    Posts
    19,389
    Quote Originally Posted by shakeysimon View Post
    No worries I’ll drop it over at some point over the weekend

    Groovy
    God rest ye jelly mental men

  11. #11
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,322
    yes Nick, in fact I have one someplace I use in case of such eventualities on guns. The front and rear can be adjusted for around 1mm of lateral movement each. A google should throw something up, but if you get stuck, let me know..

    here's one:
    http://www.jsramsbottom.com/products...91;aop55].html
    Last edited by Shed tuner; 17-05-2018 at 06:26 PM.
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  12. #12
    Join Date
    Oct 2008
    Location
    Bude
    Posts
    805
    http://m.uttings.co.uk/p106545-sport.../#.Wv3IxxbTWEc
    This is the ones I’ve got,you should be able to get the scope parallel to the barrel with them

  13. #13
    Join Date
    Jul 2012
    Location
    durham
    Posts
    1,186
    Quote Originally Posted by tinbum View Post
    Just tagging onto this thread, but........

    My Mk2 has an issue where the scope rail is out of line with the barrel. The barrel is straight, the main body tube is straight, but the breech just isn't in line. It's not glaringly obvious and its only after zeroing and finding the pellets striking out to the right the further out you shoot that makes it apparent.
    The gun is flawless in every other respect and the stock has been beautifully restored, but I'm pulling my hair out with this issue.

    Can I get a mount thats adjustable for windage? I just want to get it sorted before I inevitably sell it!
    Had a similar problem,was about to give up when I removed the thread protector from the end and could see the threaded portion was bent,with the protector on it looked perfectly straight,carefully straightened the threaded end and now shoots straight and true,the end thread is easily bent.

  14. #14
    Join Date
    Apr 2002
    Location
    Near Wimbledon, SW London, or Lusaka, Zambia
    Posts
    26,322
    Quote Originally Posted by grieva View Post
    Had a similar problem,was about to give up when I removed the thread protector from the end and could see the threaded portion was bent,with the protector on it looked perfectly straight,carefully straightened the threaded end and now shoots straight and true,the end thread is easily bent.
    presumably when it had a silencer attached ?

    It's only an M10 fine thread IIRC, so pretty delicate - ~ 8mm core dia with a 5.5mm hole thru it..
    Always looking for any cheap, interesting, knackered "project" guns. Thanks, JB.

  15. #15
    Join Date
    Jul 2012
    Location
    durham
    Posts
    1,186
    Quote Originally Posted by Shed tuner View Post
    presumably when it had a silencer attached ?

    It's only an M10 fine thread IIRC, so pretty delicate - ~ 8mm core dia with a 5.5mm hole thru it..
    Would have seen it had I a 10mm silencer,the thread protector masked the problem,I fired over 250 shot before finding the problem my right arm resembled Popeye's and left leg had has a bruise 6" round where I placed the rifle to cock it,the next step was to use it as a javlin.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •